Water Supply Metering (Hefei Electromagnetic Water Meter) Case
Company:Hefei Water Supply Group Co. LTD
Project:Hefei Water Supply Group 2021-2023 electromagnetic water meter fixed supplier procurement items
Project background:In order to facilitate the design, planning and organization of construction of the new project, Hefei Water Supply Group chooses the intelligent electromagnetic water meter with remote transmission function to realize the online monitoring and data analysis of water consumption. Based on the real-time online monitoring of the flow, pressure and water quality of each zone through the zoning measurement of the water supply network, it calculates and analyzes the minimum flow at night by combining the transmission data. The minimum flow at night is less affected by seasonal changes. Through the analysis of the minimum flow at night, the reported or unreported leakage water can be identified to assist leak detection personnel to optimize leak detection procedures and improve the efficiency of pipe network operation and maintenance management. In addition, through real-time monitoring of water supply flow, the areas with possible leakage points can be analyzed and identified in advance. Thus prevention in advance, timely control, effectively reduce pipe network leakage rate, improve water supply efficiency, and save precious water resources.
Project requirement:It can accurately measure the large flow rate at peak and small flow rate at night, and the remote data can be compatible with various software platforms of the company. In some working conditions, the installation mode without straight pipe section should be adopted, which can be used in harsh downhole environment for a long time. The sensor adopts all-pass structure, zero pressure loss, no wear; Large scale ratio is conducive to water supply enterprises to improve water supply recovery rate, reduce leakage rate and improve water resource utilization efficiency.
Special needs:
Product application:A+K electromagnetic water meter has the characteristics of wide range, low initial flow rate and high precision. Drip measurement is more suitable for non-resident users' trade settlement and DMA cell night minimum flow monitoring. There are pressure and remote transmission modules available for users to choose, and its own remote transmission module can realize fast docking with the three-party system. At present, the ETFE spraying technology, compared with the traditional rubber and PTFE lining process, has obvious advantages in acid and alkali resistance, corrosion resistance, anti-chapping, anti-falling, friction resistance, impact resistance, no scaling, long life and so on. Its theoretical service life is as long as 30 years. The most important is: the use of ETFE lining coating process, due to the liquid connection area is hundreds of times larger than rubber or tetrafluoride lining, its grounding performance and lightning protection function has been geometrically improved.
Customer evaluation:Installation condition requirements are low, accurate and reliable measurement, professional service level.
Scene Photograph
Hydraulic Metering (Zibo Water Resources Electromagnetic Flowmeter) Case
Company:Zibo Zhengda Water Construction Co., LTD
Project:Zibo Yellow River Diversion Project Intelligent transformation project of water transmission line management facilities
Project background:Water resources monitoring and measurement is the necessary means of scientific, quantitative and fine management of water resources, and also the basic conditions for effective allocation of water resources and promoting high-quality development of water resources. The Ministry of Water Resources attaches great importance to the construction, operation and management of water conservancy monitoring and metering facilities, and constantly improves the capacity and level of water use monitoring and metering. In order to implement the water control idea of "giving priority to water conservation, spatial balance, systematic management and both efforts" and promote the prominent weak points of high-quality development of water conservancy, the competent units at all levels are required to effectively monitor and measure the total amount of water consumed. The actual water consumption of existing metering facilities should be accurately monitored and measured, the monitoring and metering facilities should be regularly operated and maintained, and an authoritative, efficient, unified and perfect water consumption measurement and statistics system should be established.
Project requirement:Full digital quantity processing, strong anti-interference ability, reliable measurement, high precision, wide flow measurement range, suitable for power supply voltage range, fast computing speed, high precision, stable flow measurement performance, low power consumption, no moving parts in the pipeline, unflow parts, almost no additional pressure loss in the measurement; The measurement results are independent of velocity distribution, fluid pressure, temperature, density, viscosity and other physical parameters. Full Chinese menu operation, easy to use, simple operation, easy to learn and understand; With RS485, RS232, Hart and Modbus digital communication signal output; With self-test and self-diagnosis function; Hourly total recording function, hour as a unit to record the total flow, suitable for time-sharing measurement system; Internal has a number of integrators can respectively display the forward cumulant reverse cumulant and difference cumulant, internal is provided with no power off clock, can record the power off time.
Special needs:
Product application:A+K electromagnetic flowmeter can be used in a variety of different process conditions for high precision measurement, is an economic flow measurement solution, with high reliability, high measurement stability, no pressure loss, strong vibration resistance, easy installation and debugging.
Customer evaluation:The product has stable operation and accurate measurement. In terms of the stability of flow measurement curve, it reaches or even exceeds the imported products. Accurate and stable flow signal output, and the operation parameters have reached the domestic leading and international advanced level.
Scene Photograph
Sewage And Drainage Measurement (Yinxi Ecological Industrial Park) Case
Company:Fujian Yucheng Construction Engineering Co. LTD
Project:Yinxi Ecological Industrial Park road rain and pollution diversion pipeline transformation and metering upgrading project
Project background:In order to strengthen the management of pollutant discharge permits, standardize the pollutant discharge behaviors of enterprises, public institutions and other producers and operators, control pollutant discharge, and protect and improve the ecological environment, the Administrative Committee of Yinxi Ecological Industrial Park shall, according to the Environmental Protection Law and other relevant laws and regulations, clarify the scope and management categories of pollutant discharge permit management, and standardize the application and approval procedures of pollutant discharge permits. We will strengthen the management of pollutant discharge measurement, strict supervision and inspection, and strengthen legal liability, and standardize the work of pollutant discharge permit and measurement management.
Project requirement:Suitable for industrial water, domestic sewage, enterprise drainage with weak corrosive medium, sensor coil optimization design, and through the most strict real flow test, to ensure the measurement accuracy of products. Signal electrode for thorough electrostatic shielding processing, small signals will not be interfered by the coil, to ensure the measurement accuracy of low flow rate, coil and the outside world for isolation processing, long-term insulation strength, to ensure the long-term measurement accuracy of the sensor, the grounding electrode structure, can be very good shielding electrical noise interference, provide accurate measurement results, the use of customized double-layer shielding cable, The product itself has a self-checking function and is displayed on the screen.
Special needs:Non-full pipe flow measurement of sewage drainage network.
Product application:A+K electromagnetic flowmeter can be used in a variety of different process conditions for high precision measurement, is an economic flow measurement solution, with high reliability, high measurement stability, no pressure loss, strong vibration resistance, easy installation and debugging characteristics; The first ETFE spray lining in China has excellent chemical corrosion resistance, low friction coefficient and excellent insulation. It has obvious advantages in impact resistance, anti-cracking, anti-peeling, no scaling, long life and so on. It can be used in various working conditions of water supply and drainage, water treatment, total sewage control of environmental protection, petrochemical industry, iron and steel metallurgy, electric power, papermaking and other industries. In particular, A+K non-full tube electromagnetic flowmeter is a kind of flow measurement system to measure the natural flow on the free surface in the non-full tube state. It is based on the flow rate - water level calculation method, and adopts the advanced water level tracking, flow rate measurement system and microprocessor, so as to ensure the accuracy of speed measurement and calculation. The section forms of regular open channels are circular, rectangular and trapezoidal. According to the shape of channels, three mathematical models such as Manning formula method, single point method and multi-point method can be adopted, so as to meet the measurement accuracy under different environments and realize the accurate measurement of sewage drainage flow of enterprises.
Customer evaluation:Product installation environment requirements are not high, the detailed design is reasonable, easy to install and debug, easy to use and easy to learn, stable and reliable measurement performance, after-sales service response in time, service personnel of high professional level.